HARRIS MJ
The HMJB Advantage - Smarter Combustion
The Harris Multi-Jet Burner is not just another incinerator. It is a unique, patented system centered around a hollow, perforated auger that revolutionizes the combustion process. This core design delivers air directly into the heart of the fuel bed, ensuring complete, efficient, and controlled combustion of even the most difficult-to-burn materials.
Step One
Feed: Waste is fed into the system via the unique auger.
Step Two
Air Injection:  The rotating auger acts as an air manifold, injecting pre-heated air radially through the waste.
Step 3
Staged Combustion: 
This precise air delivery eliminates oxygen-starved "cold pockets," ensuring every particle of waste is thoroughly combusted.
Step 4
Heat Recovery: The intense heat generated is captured and can be used to produce steam, hot water, or electricity via a standard generator.
Step 5
Emissions Control:
 Flue gases pass through a sophisticated filtration system (e.g., ceramic filters with reagent dosing) to ensure emissions are well within IED limits.
Emissions & Environmental Compliance
Initial testing by UKAS-accredited REC Environmental Monitoring confirmed all pollutant concentrations were "comfortably within low ranges" and that CO and NOx could be operated below ELVs (Emission Limit Values).
IED Compliant
As assessed by International Project Developers, the system's combustion quality is "very good," and when integrated with our recommended flue gas treatment, it neutralizes residual contaminants to "within the prescribed IED limits."
